Multipurpose primer
POLYAC® 12 is a rigid, very fast curing, PMMA (Polymethyl methacrylate) based primer for the POLYAC® systems, to be applied on mineral, absorbent surfaces such as concrete, sand/cement screeds, brick and tiles.
The product is available in 180 Kg drums or 20 Kg pails.
The primer has excellent adhesion and can be applied at temperatures below freezing thanks to its rapid reaction and good reactivity. POLYAC® 12 can be used as concrete protection and the quartz broadcasted variant can be used as a fast primer for epoxy and polyurethane floor systems.
Visco 200 - 250 mPa.s
(20 °C Brookfield, spindel III/200 tr/min.)
It can be used in the Food and Beverage industry, Veterinary and for general industry.
Benefits:
• High reactivity
• Fast curing
• Applicable at low temperature
• Optimal viscosity
• Widely applicable
• Can be applied horizontally and vertically
• Optimized polymerization under difficult conditions
• To be applied with roller or brush
Where to use:
• Concrete
• Sand / cement screeds
• Brick & Tiles
• It can also be used as protection for the concrete
 |