Home > Products
Poly Methyl MethAcrylate (PMMA) systems
In partnership with Korachem NV, STC International Srl offers a full range of certified systems based upon PMMA, PUMA and MMA POLYAC® products.
The POLYAC® range cover all requirements from Flooring, over Waterproofing and Bridge & Highway.
PMMA system produces a fast curing high-quality, flexible or rigid, durable floor, waterproofing or Bridge deck protection.
It can be used in a multitude of industries, as hygienic flooring in Food & Beverage, agriculture, petrochemical, waste treatment and general Industry. Or as waterproofing system for Parking Decks, bridges, roofs, terraces, infrastructures or reservoirs and more…
It can also be applied under though conditions as at -50°C in freezers, or other cold environments.
Our range includes screed, multi-layer, self-levelling and coving, ramp and coating systems in different grades and thicknesses suitable for a variety of environments.
Poly Methyl MethAcrylate (PMMA) based floor coating systems that are fast curing systems for new construction and renovation.
The full curing time is about 1 to 2 hours and can be executed until temperatures down to -50 C
Poly Methyl MethAcrylate (PMMA) ensures a seamless, chemically resistant floor that can withstand heavy loads, chemicals and extreme low temperatures.
All this making them ideal for Food & Beverage Industry production areas.
INFORMATION ABOUT THE NON TOXICITY OF POLYAC® RESINS
SAFETY
PMMA (Poly Methyl MethAcrylate) resins are considered irritant to the skin on direct contact.
These resins are neither toxic nor harmful.
Other resins can eventually cause health problems and allergic reactions.
Since the development of PMMA resins, no health problems or allergies have been reported in their use.
The specific odour of methacrylate monomer does not present any hazard.
Proper ventilation of the work area is recommended to remove the odour.
The odour will disappear soon after polymerisation of the resin.
Methacrylate monomer has a very low odour threshold (0.008 ppm, 0.8 mg/m³).
The allowable concentration for 8 hours per day and 5 working days per week is 50 ppm.
(600 mg/m³ Sweden – Dutch Advisory Council 38 mg/m³)
Personal protective equipment:
• Persons in direct contact with POLYAC® resins are required to wear the following personal protective
equipment:
- gloves, safety goggles and mask.
• Persons located more than 5m away from the processing area:
- no specific protective equipment required.
Additional information can be found in the technical documents and safety data sheets of POLYAC® Resins.
 |