Damp primer
POLYAC® 18 is a rigid, very fast curing, PMMA (Polymethyl methacrylate) based primer for the POLYAC® systems, to be applied on damp mineral surfaces, new concrete and wood.
The product is available in 180 Kg drums or 20 Kg pails.
POLYAC® 18 is a rigid primer for the POLYAC® floor, membrane and other POLYAC® systems that are applied to damp mineral, absorbent surfaces such as concrete, sand/cement screeds, brick, tiles…
The primer has excellent adhesion and can be applied at temperatures below freezing thanks to its rapid reaction and good reactivity. POLYAC® 18 can be used as concrete protection and the quartz broadcasted sanded-in variant can be used as a fast primer for epoxy and polyurethane floor systems. We recommend first hardening and adhesion testing on the surface in question before applying the entire surface.
Visco 200 - 250 mPa.s
(20 °C Brookfield, spindle III/200 rpm)
It can be used in the Food & Beverage industry, veterinary, general industry and waterproofing
Benefits:
• On damp surfaces
• High reactivity
• Fast curing
• Applicable at low temperature
• Optimal viscosity
• Widely applicable
• Can be applied horizontally and vertically
• Optimized polymerization under difficult conditions
• Can be applied with roller or brush
Where to use:
• Concrete
• Sand / Cement screeds
• Tiles & Bricks
• It can also be used as protection for the concrete
Polyac® 18
 |