Joint Reconstruction
STC PolySpartan JRF is a low potlife – extremely fast cure product.
Temperature and humidity can influence the speed of cure, a retardant additive STC PolySpartan Additive R can be added into the A+B mix
When used outdoors the product is able to withstand a light rain after 15 min of curing.
STC PolySpartan JRF can be applied until -20°C, contact STC for detail of the application method.
Apply the STC PolySpartan JRF + quartz mix on a wet primer, as STC PolySpartan PF or a tacky Epoxy primer as STC PrimEpox R or PrimEpox D
After curing, optional STC PolySpartan TCA or TCAM (Matt) Colour or Clear can be applied as top coat.
Benefits:
• Extremely Fast Curing
• Excellent wear and chemical resistance
• UV resistant – non yellowing
• Higher viscosity
• Extremely high adhesion
• Zero odour
• Solvent free
Where to use:
• Outdoor
• Indoor
• Cooler
• Freezer
![]() |